Mac Aura XB

Features

  • Super-bright single-lens wash with fully premixed color
  • Broad color palette, RGBW color mixing
  • Eye-candy Aura Effect™
  • Uniform shades
  • Built-in FX engine
  • 10 to 60° uniform zoom
  • 6000 Lumens output
  • Rapid movement
  • Compact, low weight design (6.5 kg)
  • High efficiency, low power consumption, long lifetime

 

Physical

Length (across yoke): 302 mm (11.9 in.)

Width (across yoke): 302 mm (11.9 in.)

Height (head straight up): 360 mm (14.2 in.)

Weight (without accessories): 6.5 kg (14.4 lbs.)

 

Dynamic Effects

Beam color mixing: RGBW

Aura (secondary lens array illumination) color mixing: RGB

Beam color temperature control: CTO, variable 10 000 – 2500 K

Beam and aura electronic ‘color wheel’ effect: 33 LEE-referenced colors plus white, variable-speed color-wheel rotation effect and random colorBeam and aura independent shutter effects: Electronic, with regular and random pulse, burst and strobe effects

Pre-programmed effects: Range of independent and synchronized Beam and Aura FX, two combinable

Electronic dimming: Independent beam and aura, four dimming curve options

Zoom: 10° – 60° (one-tenth peak angle)

Pan: 540°

Tilt: 232°

Pan and tilt speed: Adjustable via onboard control panel and DMX

 

Control and Programming

Control options: Independent or synchronized Beam and Aura control

Control system: DMX, RDM

Control resolution: 8-bit, with 16-bit control of pan & tilt

DMX channels: 14/25

Setting and addressing: Control panel with backlit graphic display

DMX compliance: USITT DMX512-A

RDM compliance: ANSI/ESTA E1.20

Transceiver: RS-485

Firmware update: Via DMX with Martin™ USB Duo DMX Interface Box

 

Connections

AC power: Neutrik PowerCON TRUE1 NAC3PX dual socket

AC power input socket: Accepts Neutrik PowerCON TRUE1 NAC3FX-W cable connector

AC power thru socket: Accepts Neutrik PowerCON TRUE1 NAC3MX-W cable connector

DMX data in/out: 5-pin locking XLR

 

Electrical

Maximum power consumption: 400 W

Power supply unit: Auto-ranging electronic switch mode

AC power: 100-240 V nominal, 50/60 Hz

Typical half-cycle RMS inrush current: 10.7 A

Power consumption, all effects static, zero light output:<25 W

 

Typical Power and Current

100 V, 60 Hz: 359 W, 3.8 A, PF 0.99

120 V, 60 Hz: 355 W, 3.2 A, PF 0.99

208 V, 60 Hz: 350 W, 1.8 A, PF 0.97

230 V, 50 Hz: 349 W, 1.7 A, PF 0.95

240 V, 50 Hz: 349 W, 1.6 A, PF 0.95

*Measurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of +/- 10%.